ValueRAM’s KVR32S22D8/16 is a 2G x64-bit (16GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM),2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bitFBGA components. The SPD is programmed to JEDEC standardlatency DDR4-3200 timing of 22 22-22 at 1.2V. This 260-pin DIMMuses gold contact fingers. The electrical and mechanicalspecifications are as follows:

Features:

Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP = 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Dual-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
PCB: Height 1.18 (30.00mm)
RoHS Compliant and Halogen-Free